RSS

Cheap housing and house plans

     

Steel Frame House Plans, Steel Frame House Kits
House Factory International

We provide disaster resistant, low-cost, quality housing for disaster prone areas of the world. Our light gauge steel framing packages include but are not limited to single homes, duplexes and multiplexes, as well as multistory buildings. These structures can be engineered to specific needs, fabricated and shipped to their destinations within weeks. We have also developed a method to provide all necessary materials to construct your houses.
      If requested we can provide all the materials that you need for roofing, siding, windows, doors, plumbing, electrical, central heating & airconditioning, partitions, kitchen and bath items, flooring and other finishing materials.

  We can arrange transport all over the world.

Steel Frame House Plans, Steel Frame House Kits
House Factory International

Hindmarsh Finance

International Project Finance

Save time & money


Builders Save on Time and Cost Using Steel Framing Modern steel house frames are easy to use. Suppliers are making them ever more appealing to builders as they work to improve their systems and meet builders. needs.

Builders can do a high quality job with ease and efficiency. Computer aided design and manufacture permit the building of houses of almost any style and floor plan.

Steel`s ability to cover long internal open spans enhances design-flexibility. Long spanning trusses also reduce the amount of support framing required, thereby reducing the cost. In some cases light steel framing eliminates the need for heavy structural sections. Factory assembly also reduces the amount of on-site labour, wastage, and site theft.

These are all cost-savers. House Factory International offers steel framing as an option on all new homes. Steel frames “are now competitively priced against traditional alternatives. Because steel building frames can also be quicker to erect, there are advantages for both the builder and the customer” Steel frames are 70% lighter than wooden ones (yet very strong) and are easily handled. They do not absorb water in wet weather. Suppliers deliver them in pre-fabricated form clearly identified for assembly.

With each house lot of framing the supplier provides a complete frame and truss layout. Most also provide comprehensive instructions or a manual to remove any guesswork. Fastener and tool manufacturers have gone out of their way to make it really easy to work in steel. They have made suitable hand tools readily available and they form part of most builders. and subcontractors. kits. The frame suppliers make it easy.

They provide all the ancillary products the builder needs for the job. They also indicate the type, positioning, and number of all fixings. Depending on the particular system, screws and/or nails are used to join steel frames. Some can even be twisted and locked into position. It is simple to tie a frame onto a slab using conventional methods.

Frames have pre-punched holes for quick and easy installation of plumbing and electrical services. Electrical and plumbing grommets to isolate wiring and copper piping from the frame are readily available. It is a simple matter to isolate copper piping from the frame to guard against the possibility of bimetallic corrosion.

It is easy to fix internal linings and external claddings to steel frames and to fit internal fixtures. Ceiling battens are not usually required if trusses are placed at 600mm, which means that ceiling plasterboard can be fixed directly to the bottom chords of the trusses. This is another cost saver.

Internal plasterboard is screw-fixed and because steel frames are so straight, trades people find there is no need for packing to compensate for non-linear dimensions. Internal lining tradesmen actually prefer steel framing because it is so straight and true.

Specialist sub-contractors can install bathrooms and kitchens more easily and quickly and at lower cost for the same reasons. It is thus a simple matter to achieve a high standard of internal finish that will last because steel framing won.t warp, twist, or shrink after installation.

Hardened steel nails and screws are available to fix architraves and skirtings. Installing roof tiling is similar to working on timber. It is easy to fix roof battens to roof trusses. Screws or even clouts can be used to fix flashings. Windows and doorframes are fixed in the same way as for timber.

For brickwork, clip-on brick ties are available, which is a great time saver. Termite management is simplified. Termites cannot destroy the steel frame. The builder is thus far less likely to be involved later in any disputes resulting from extensive termite damage. The builder also does not have to handle a chemically treated product. Householders particularly appreciate the termite-proof nature of steel as these days they are much more aware of termites and the widespread damage they inflict.

They also appreciate an immediate environment that is as free of chemicals as possible. Home owners are becoming more discerning. There are compelling reasons why interest in steel framing is on the increase. For example they are termite-proof and will not burn.

Steel is 100% recyclable. Many insurance companies offer the builder and owner-builder more favourable rates during the building process, and will offer the householder cheaper insurance on the house and contents. Resale values are often higher.

Steel Frame House Plans, Steel Frame House Kits
House Factory International

Hindmarsh Finance

International Project Finance

Online Money Stop

Online Money Stop

Purple Contact Lenses

Purple Contact Lenses

Virtual Tours

Interior designs used by House Factory:

More virtual tours:

Bedroom
Entry
Kitchen
Floor
Bedroom 1
Bedroom 2
Entry
Living

Do It Yourself – House Kits

To build your house with steel House Factory International can offer you 2 pricing options:

Option: Kit 1 – for Franchisee @ Euros 4.25/kg Includes:

1. Steel frames and trusses
2. Earthquakes resistant structures
3. Roof trusses, anchors and bolts
4. Fitting manual

Option: Kit 2 for Non-franchisee @ Euros 6.80/kg Includes:

1. Steel frames and trusses
2. Earthquakes resistant structures
3. Roof trusses, anchors and bolts
4. Fitting manual

Quoted prices are Ex-factory Constantza, Romania. All freight costs payable by the client.
These recommended prices are for flatpack kits only, which are wrapped in heavy plastics and crated to assist with transportation and reduce freight costs.
Kits will be supplied flat packed from our production facility in Romania. All banking documents will be handled by our bank. Kits can be enlarged upon to include Personal Choice items etc.
Prices will be adjusted down according to quantities ordered.

<

Powered by Wordpress Themes